How to use adhesive wire clamps in daily life?

2024-09-26

The use of adhesive wire clamps in daily life is relatively simple. The following are the specific steps and precautions:

Usage steps:

1. Prepare tools and materials:

Adhesive wire retaining clip

Cleaning cloth or alcohol swabs (for cleaning surfaces)

Scissors (if needed to cut wires)

2. Clean the mounting surface:

Use a cleaning cloth or alcohol cotton ball to clean the surface to be pasted (such as walls, tables, floors, etc.) to ensure there is no dust, oil or moisture to improve the bonding effect.

3. Measure and mark:

According to the direction of the wire, measure and mark the position of the retaining clip to ensure that the wire can pass through the retaining clip smoothly.

4. Tear off the protective film:

Carefully peel off the protective film on the back of the adhesive wire holder to expose the adhesive.

5. Attach the retaining clip:

Align the retaining clip to the previously marked position and gently press the retaining clip to ensure full contact with the surface. Keep pressing for a few seconds to ensure the adhesive adheres firmly.

6. Install the wires:

Gently place the wire into the retaining clip, making sure the wire is securely seated within the clamp.

7. Check for tightness:

After installation is complete, check that the retaining clips and wires are tight to ensure they are not loose or falling off.

Things to note:

Temperature and Humidity: When using in high temperature or humid environments, make sure to choose the appropriate adhesive to avoid affecting the bonding effect.

Load-bearing capacity: Avoid exerting excessive force on the retaining clip. Exceeding its load-bearing capacity may cause it to fall off.

Avoid repeated pasting: Adhesive fixing clips are generally not suitable for repeated pasting. If the position needs to be changed, it is recommended to use a new fixing clip.

Wire protection: When fixing wires, make sure not to damage the outer layer of the wires to avoid short circuits or other safety hazards.

By following the above steps and precautions, you can effectively use adhesive wire clips to keep wires neat and safe.